|
This article compares Unicode encodings. Two situations are considered: eight-bit-clean environments and environments like Simple Mail Transfer Protocol that forbid use of byte values that have the high bit set. Originally such prohibitions were to allow for links that used only seven data bits, but they remain in the standards and so software must generate messages that comply with the restrictions. Standard Compression Scheme for Unicode and Binary Ordered Compression for Unicode are excluded from the comparison tables because it is difficult to simply quantify their size.
[edit] Compatibility issuesA UTF-8 file that contains only ASCII characters is identical to an ASCII file. UTF-16 and UTF-32 are incompatible with ASCII files. Unicode-aware programs are required to display, print and manipulate them. This means that UTF-16 systems such as Windows and Java represent text objects such as program code as 8-bit ASCII, not UTF-16. Indeed it is very rare[citation needed] to find a UTF-16 encoded text file on any system unless it is part of some more complex structure. One counterexample is the "strings" file used by Mac OS X (10.3 and later) applications for lookup of internationalized versions of messages, these default to UTF-16 and "files encoded using UTF-8 are not guaranteed to work. When in doubt, encode the file using UTF-16"[1]. XML is normally encoded as UTF-8, rarely if ever in UTF-16. Further, UTF-16 files contain many nulls that are incompatible with normal C string handling. This means that programs need to be specially written to handle UTF-16 files. On the other hand, legacy programs can generally handle UTF-8 encoded files even if they contain non-ASCII characters. [edit] Size issuesUTF-32 requires four bytes to encode any character. Since characters outside the basic multilingual plane (BMP) are typically rare, a document encoded in UTF-32 will often be nearly twice as large as its UTF-16–encoded equivalent because UTF-16 uses two bytes for the characters inside the BMP, or four bytes otherwise. UTF-8 uses between one and four bytes to encode a character. It requires one byte for ASCII characters, making it half the space of UTF-16 for texts consisting mostly of ASCII. For other Latin characters and many non-Latin scripts it requires two bytes, the same as UTF-16. Only a few frequently used Western characters in the range U+0800 to U+FFFF, such as the € sign U+20AC, require three bytes in UTF-8. Characters outside of the BMP above U+FFFF need four bytes in UTF-8 and UTF-16. The conservation of bytes in encoding files to a Unicode transform format (UTF) depends on the code points used and the scripts and blocks from which those code points are drawn. For example using the more common characters from the BMP makes UTF-16 more space-conserving than UTF-32. In the same way using characters predominantly from the UTF-8 scripts makes UTF-8 more space efficient than UTF-16. The UTF-8 scripts are those scripts where UTF-8 only requires fewer than three bytes per character (only one byte for the ASCII-equivalent Basic Latin block) and include: Latin, Greek, Cyrillic, Armenian, Hebrew, Arabic, Syriac, Thaana, N'Ko, and the IPA and other Latin-based phonetic alphabets. All printable characters in UTF-EBCDIC use at least as many bytes as in UTF-8, and most use more, due to a decision made to allow encoding the C1 control codes as single bytes. For seven-bit environments, UTF-7 clearly wins over the combination of other Unicode encodings with quoted printable or base64. [edit] Processing issuesFor processing, a format should be easy to search, truncate, and generally process safely. All normal Unicode encodings use some form of fixed size code unit. Depending on the format and the code point to be encoded, one or more of these code units will represent a Unicode code point. To allow easy searching and truncation, a sequence must not occur within a longer sequence or across the boundary of two other sequences. UTF-8, UTF-16, UTF-32 and UTF-EBCDIC have these important properties but UTF-7 and GB18030 do not. Fixed-size characters can be helpful, but even if there is a fixed byte count per code point (as in UTF-32), there is not a fixed byte count per displayed character due to combining characters. If you are working with a particular API heavily and that API has standardised on a particular Unicode encoding, it is generally a good idea to use the encoding that the API does to avoid the need to convert before every call to the API. Similarly if you are writing server-side software, it may simplify matters to use the same format for processing that you are communicating in. UTF-16 is popular because many APIs date to the time when Unicode was 16-bit fixed width. However, using UTF-16 makes characters outside the Basic Multilingual Plane a special case which increases the risk of oversights related to their handling. That said, programs that mishandle surrogate pairs probably also have problems with combining sequences, so using UTF-32 is unlikely to solve the more general problem of poor handling of multi-code-unit characters. [edit] For communication and storageUTF-16 and UTF-32 are not byte oriented, so a byte order must be selected when transmitting them over a byte-oriented network or storing them in a byte-oriented file. This may be achieved by standardising on a single byte order, by specifying the endianness as part of external metadata (for example the MIME charset registry has distinct UTF-16BE and UTF-16LE registrations as well as the plain UTF-16 one) or by using a byte-order mark at the start of the text. UTF-8 does not have this problem, since it has only a big-endian encoding. If the byte stream is subject to corruption then some encodings recover better than others. UTF-8 and UTF-EBCDIC are best in this regard as they can always resynchronise at the start of the next good character. UTF-16 and UTF-32 will handle corrupt bytes well (again recovering on the next good character) but a lost byte will garble all following text. GB18030 may be thrown out of sync by a corrupt or missing byte and has no designed in recovery. [edit] In detailThe tables below list the number of bytes per code point for different Unicode ranges. Any additional comments needed are included in the table. The figures assume that overheads at the start and end of the block of text are negligible.
[edit] Eight-bit environments
[edit] Seven-bit environmentsThis table may not cover every special case and so should be used for estimation and comparison only. To accurately determine the size of text in an encoding, see the actual specifications.
[edit] Compression schemesBOCU-1 and SCSU are two ways to compress Unicode data. Their encoding relies on the how text is frequently used. Most runs of text use the same script; for example, Latin, Cyrillic, Greek and so on. This normal use allows many runs of text to compress down to about 1 byte per code point. These stateful encodings make it more difficult to randomly access text at any position of a string. These two compression schemes are not as efficient as other compression schemes, like zip or bzip2. Those general-purpose compression schemes can compress longer runs of bytes to just a few bytes. The SCSU and BOCU-1 compression schemes will not compress more than the theoretical 25% of text encoded as UTF-8, UTF-16 or UTF-32. Other general-purpose compression schemes can easily compress to 10% of original text size. The general purpose schemes require more complicated algorithms and longer chunks of text for a good compression ratio. Unicode Technical Note #14 contains a more detailed comparison of compression schemes. [edit] Historical: UTF-5 and UTF-6Proposals have been made for a UTF-5 and UTF-6 for the internationalization of domain names (IDN). The UTF-5 proposal used a base 32 encoding, where Punycode is (among other things, and not exactly) a base 36 encoding. 25 = 32 explains the name UTF-5 for a code unit of 5 bits.[2] The UTF-6 proposal added a running length encoding to UTF-5, here 6 simply stands for UTF-5 plus 1.[3] The IETF IDN WG later adopted the more efficient Punycode for this purpose.[4]. [edit] Not being seriously pursued: UTF-1, UTF-9 and UTF-18RFC 4042 specifies "UTF-9 and UTF-18 Efficient Transformation Formats of Unicode", but is not being actively pursued. It was released on April 1, 2005 as an April Fools' Day RFC and is of marginal use, for example, in computers with 36-bit word lengths. UTF-1 never gained serious acceptance. UTF-8 is much more frequently used. [edit] References
offerte voli | hoteles | precios | voli | die verzeichnis | annuarie web | stop smoking london |