Wood grain

Maple burl, not to be confused with bird's eye maple

Wood grain describes the alignment, texture and appearance of the wood fibres. This is often important in its effect on woodworking techniques (e.g. against the grain). In describing the alignment of the wood in the tree a distinction may be made. Basic grain descriptions and types include:

• straight - grain which runs in a single direction along the cut wood, a product of a straight growing tree
• cross - grain in which some cells grow out from the major growth axis of the tree
• spiral - grain which develops as the trunk of the tree twists in development
• interlocked (roey grain) A step beyond spiral grain occurring when growth rings in a twisting trunk develop misaligned grain

Sketch of A—Quarter-sawn & B—flat-sawn

typically figured red gum table

mountain ash floor, showing some fiddleback figure

In addition, there are a few special grain alignments. Their rarity often promotes the value of both the raw material, and the finished work it becomes a part of. These include:

• bird's eye
• quilted
• fiddleback
• curly

In describing the application of a woodworking technique to a given piece of wood, the direction of the technique may be:

• with the grain
• "against" or "across" the grain

In a wider sense, the term grain may also be applied to the orientation of the cut, the way a given piece of wood has been sawn:

• flat-grain: flat-sawn or plain sawn,
• edge grain: quarter-sawn or rift-sawn or straight-grained, and
• end grain.

Strictly speaking, grain is not the same as the "figure" of wood.

Wood with deformed grains is known as burr wood or burl wood.

[edit] See also

• Wood as a medium
• Wood finishing

Wikimedia Commons has media related to:

Wood grain

This article about joinery, woodworking joints, carpentry or woodworking is a stub. You can help Wikipedia by expanding it.

This decorative art-related article is a stub. You can help Wikipedia by expanding it.